THD 10-2410N

DC/DC Converter THD 10N Series, 10 Watt • • Wide 2:1 input voltage range • • High efficiency up to 89% • • • I/O isolation 1'500 VDC Internal EMI-filter meets EN 55022, Class A without external components Operating temperature range –40°C to +85°C UL 62368-1 IEC 62368-1 The THD 10N series is a range of isolated high performance 10W DC/DC converters in a low profile DIL-24 package with standard industry pin-out. Other features of this product are built-in overvoltage protection and internal EMI-filter to meet EN 55022, class A. Full SMD-design with exclusive use of ceramic capacitors guarantees a high reliability and long product lifetime. Typical applications for these converters are industrial electronics, instrumentation, data communication systems and battery operated equipment with limited space available on the PCB. Overload protection 3-year product warranty Models Order Code Input Voltage Range THD 10-1210N THD 10-1211N THD 10-1212N THD 10-1213N THD 10-1222N THD 10-1223N THD 10-2410N THD 10-2411N THD 10-2412N THD 10-2413N THD 10-2422N THD 10-2423N THD 10-4810N THD 10-4811N THD 10-4812N THD 10-4813N THD 10-4822N THD 10-4823N www.tracopower.com 9 - 18 VDC (12 VDC nom.) 18 - 36 VDC (24 VDC nom.) 36 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5.1 VDC 12 VDC 15 VDC +12 VDC +15 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC +12 VDC +15 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC +12 VDC +15 VDC 2'700 mA 2'000 mA 833 mA 666 mA 416 mA 333 mA 2'700 mA 2'000 mA 833 mA 666 mA 416 mA 333 mA 2'700 mA 2'000 mA 833 mA 666 mA 416 mA 333 mA March 10, 2022 Vnom Efficiency Imax –12 VDC –15 VDC 416 mA 333 mA –12 VDC –15 VDC 416 mA 333 mA –12 VDC –15 VDC 416 mA 333 mA typ. 86 % 85 % 88 % 89 % 88 % 89 % 86 % 85 % 89 % 89 % 88 % 89 % 86 % 85 % 87 % 88 % 87 % 88 % Page 1 / 4 THD 10N Series, 10 Watt Input Specifications Input Current - At no load 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: - At full load Surge Voltage Under Voltage Lockout Recommended Input Fuse Input Filter 20 mA typ. 15 mA typ. 10 mA typ. 940 mA typ. 470 mA typ. 240 mA typ. 25 VDC max. (1 s max.) 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 8.5 VDC max. 17 VDC max. 34 VDC max. (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise (20 MHz Bandwidth) - Voltage Balance (symmetrical load) - single output - dual output Capacitive Load - single output - dual output ±2% max. 1% max. 1% max. 1.2% max. 1.2% max. (Output 1) 1.2% max. (Output 2) dual output models: 2% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5.1 Vout models: 12 Vout models: 15 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: 3.3 Vout models: 5.1 Vout models: 12 Vout models: 15 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Short Circuit Protection Output Current Limitation Transient Response - Response Deviation - Response Time 80 mVp-p typ. 80 mVp-p typ. 100 mVp-p typ. 100 mVp-p typ. 100 / 100 mVp-p typ. 100 / 100 mVp-p typ. 1'000 µF max. 1'000 µF max. 470 µF max. 330 µF max. 220 / 220 µF max. 150 / 150 µF max. Not required ±0.02 %/K max. Continuous, Automatic recovery 110% min. of Iout max. 150% typ. of Iout max. 3% typ. / 5% max. (75% to 100% Load Step) 300 µs typ. / 600 µs max. (75% to 100% Load Step) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com March 10, 2022 Page 2 / 4 THD 10N Series, 10 Watt Safety Specifications Safety Standards CSA-C22.2, No. 60950-1 EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/thd10n PD 2 - IT / Multimedia Equipment - Certification Documents Pollution Degree EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions External filter proposal: EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge Ext. input component: - Conducted RF Disturbances EN 55032 class A (internal filter) EN 55032 class A (with external filter) www.tracopower.com/overview/thd10n EN 55024 (IT Equipment) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A 220 μF, 100 V EN 61000-4-6, 10 Vrms, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Remote Control - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Voltage Controlled Remote - Off Idle Input Current - Remote Pin Input Current Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF See Cleaning Guideline: Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type 95% max. (non condensing) –40°C to +85°C +105°C max. –50°C to +125°C 2.86 %/K above 70°C Natural convection (20 LFM) On: 3.5 to 12 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 10 mA max. -0.5 to 0.5 mA 6'000 m max. 330 kHz typ. (PWM) Functional Insulation 1'500 VDC 1'800 VDC 1'000 MΩ min. 1'000 pF typ. 1'500 pF max. 1'000'000 h (MIL-HDBK-217F, ground benign) Allowed (hermetical product) www.tracopower.com/info/cleaning.pdf Metal Non-conductive Plastic (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2 - 4 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com March 10, 2022 Page 3 / 4 THD 10N Series, 10 Watt Connection Type Footprint Type Soldering Profile THD (Through-Hole Device) DIP24 Wave Soldering 260°C / 10 s max. 17.3 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) Weight Environmental Compliance - REACH Declaration - RoHS Declaration Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/thd10n Outline Dimensions 11 22 16 2.54 23 14 (0.80) Pinout (0.60) 9 20.3 3 15.22 2 (0.10) 1 Pin Single Dual 1 Remote On/Off Remote On/Off 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No pin Common –Vout 11 NC 14 +Vout +Vout 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 10.2 (0.40) 4.1 Ø 0.5 (0.16) NC: Not connected (Ø 0.02) 2.54 2.54 15.24 5.08 4.5 (0.10) (0.10) (0.60) (0.20) (0.18) 31.8 (1.25) Dimensions in mm (inch) Tolerances: x.x ±0.50 (±0.02) Tolerances: x.xx ±0.25 (±0.01) Pin diameter ±0.05 (0.002) © Copyright 2022 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. March 10, 2022 Page 4 / 4